Top engine cooling additive
Reduce engine temperature by 15°C (30°F)
Outstanding thermal exchange
Concentrated cooling fluid
TYPE OF USE
Any cooling system of bikes, cars, ATVs… when overheating is observed or in
racing conditions to decrease engine operating temperature.
- Some racing regulation do not allow anything else than pure water, if any
doubt, check with race official organisation before using MoCool. Motul company
cannot be involved in case of race disqualification while using MoCool
- MoCool does not provide any antifreeze protection.
Engines run cooler by 15°C (30°F) : Improves thermal exchange and engine cooling
Cooling system optimal protection against corrosion.
Recommended for magnesium, aluminium alloys cases, cast iron, copper, brass and
Water pump protection, avoid cavitation
Anti-corrosion properties that remain while high temperature and ageing. Low
corrosion inhibitors consumption.
Seals, rubber pipes, and plastics parts friendly.
MOTUL MoCool is a concentrated cooling fluid that may be mixed with distillated
water for immediate use as a coolant.
Mix with water at 5% (20:1).
Do not use pure product.
Can be mixed with most coolants monoethyleneglycol based.
Color Visual Purple
Density at 20°C/68°F ASTM D1122 1.058
PH ASTM D1187 9.4