|
Schroth's Bolt On brackets are very unique and have
specific uses. Usually the brackets needed for harness use are included with
each belt. However, they can be purchased separately because each bracket solves
some common problems associated with certain belt installations.
The 01323 Kit is a bolt-in kit for 3" webbing. It is
designed in such a way that it can be bent with pliers to a specific angle for
achieving a perfect harness installation. The most common use is for shoulder
belts that need to be bolted into a harness bar. Will need the 3 bar slides that
come with your shoulder belts. If you need those as well, you need the "Wrap
Kit".
The 01324 Kit is a set of bolt in brackets that are
usually sewn into 2" Lap belts. We call it a "Rallye End" kit because it usually
comes on the street legal Rallye style belts. Like the 01323 kit, it is designed
to be bent. These pieces are commonly used in Porsche applications where space
for an Eye bolt is insufficient. This bracket can be bolted to the car, then
bent so that a Snap-In bracket can be used to fix the harness to the bracket. We
use these brackets in many applications where stock mounting locations do not
leave sufficient space, or if the thread pitch is different from the eye bolts.
The 01326 Kit is a rigid bolt in bracket for 2" webbing
that has a 3 bar slide integrated into it. This gets rid of the need for any
other brackets on the lap belt, as well as gives a method of adjustment on lap
belts with no adjusters (Formula style belts sometimes come with no lap
adjusters). The brackets have about a 10 degree angle to them which needs to be
taken into account. These brackets can also be used for HANS Specific shoulder
belts.
(Image shown is 01326)
|
