AiM MSI 0-2000psi pressure sensor - PRS-839

Description

This 2000 psi pressure sensor is ideal for measuring brake pressure (or any other pressures too high for a 100 psi sensor). This sensor has a 4-pin 719 (plastic push-on) connector and a male 1/8 NPT thread.

Note: Unlike most data logger sensors, this sensor requires battery voltage (10 - 30 VDC). Most sensors use a 5V reference signal, which is the standard for most data loggers. This sensor can only be used if the channel has a battery voltage ( +Vb ) signal available. This sensor will not work on Channels 1 or 2 of the MyChron3 Plus/Gold, Channels 1 through 3 on the MXL Pista, Channels 1 through 7 on the MXL Pro05, Channels 1 through 3 on the EVO3 Pista, or Channels 1 through 7 on the EVO3 Pro. All channels of the MyChron3 XG-Log, EVO4/EVO4S/EVO5, and MXL2/MXG/MXS have this voltage available and can use this sensor.