Schroth Harness Quickfit ASM Belt for Audi/VW

The Quick Fit Harness from Schroth is an excellent harness solution for people who have dual duty cars (track and street). Not many of us have the means to support a full time track vehicle as well as a street car, and still more of us like driving track-prepared cars on the street.

What’s the next best thing? The Schroth Quick Fit Harness. It anchors to factory points, which means you don’t have to worry about it ripping out of the sheet metal. The factory points are load tested to withstand a 3,000-pound force for 6 seconds. It has ASM technology that keeps the lap belt low and your rear end firmly planted in the seat. You don’t want the lap belt riding up and squeezing your stomach and intestines. A Schroth belt is designed not to.

The Quick Fit Belts also take advantage of the factory seat belt pre-tensioner, a device that tightens the belt 1-2 inches in the event of an accident. The Airbags will deploy as the engineers of the system intended for someone buckled in. With any other harness, the car wouldn’t detect that someone was buckled in, so the airbags would deploy faster and harder.

They also come completely out of the car, giving you full use of your street car for carrying people or cargo. That is what it’s for, isn’t it? If you have any questions regarding a harness solution for you, please contact us.

Winner of European Car’s Select Gear award in 2002!

Will Fit all Audi's except A4/S4 2002+
PLEASE NOTE: The B6 Chassis does not have a provision for a bolt-in harness on the out-board lap belt point. This means that you cannot safely install ANY aftermarket harness to DOT points. Installing these harnesses in a B6-chassis car will not be a Schroth Approved Installation!