

Description
Synthetic blend (Technosynthese®) lubricant specially designed for high performance cars powered by large displacement engines, turbo Diesel, direct injection or Gasoline engines with injection and catalytic converter. Suitable for all types of Gasoline or Diesel engines using leaded or unleaded gasoline, diesel fuel or LPG. High viscosity at high temperature (SAE 50) for engines prone to higher oil consumption, due to high mileage.
Gasoline and Diesel Engines Technosynthese
TYPE OF USE
Specially designed for high performance engines, all Gasoline or Diesel engines, turbo or naturally
aspirated, multivalves, with carburettor or with injection, with or without catalytic converter.
Suitable for all types of fuel: Gasoline standard, unleaded, Diesel fuel, LPG.
All driving conditions: City, Road, Highway.
PERFORMANCE
STANDARDS ACEA A3 / B3 API SL / CF
APPROVALS MB-Approval 229.1
VW 501 01 - 505 00
The API SL standard is more stringent than API SJ in terms of ageing resistance (average drain interval
increased), requires anti-oxidation properties that maintain a constant viscosity avoiding sludge and
deposits in the crankcase, anti-wear properties and dispersant capability.
The synthetic Technosynthese® base stock provides high lubricating power and protects perfectly the
engine while in intensive use on road, highway or in town.
The high performing anti-wear additivation results in reduction of engine internal frictions and increases
life duration by wear reduction.
High viscosity at high temperature (SAE 50) is fully adapted to engines prone to oil consumption.
Very efficient anti-deposit and anti-black sludge power which keeps the engine clean.
Anti-oxidation, Anti-corrosion, Anti-foam properties.
RECOMMENDATIONS
Drain interval: according to manufacturers’ recommendations and tune to your own use.
MOTUL 4100 POWER 15W-50 can be mixed with synthetic or mineral oils.
PROPERTIES
Viscosity grade SAE J 300 15W-50
Density at 20°C (68°F) ASTM D1298 0.879
Viscosity at 100°C (212°F) ASTM D445 19.7 mm²/s
Viscosity at 40°C (104°F) ASTM D445 154 mm²/s
Viscosity index ASTM D2270 147
Pour point ASTM D97 -30°C / -22°F
Flash point ASTM D92 230°C / 446°F
TBN ASTM D2896 8.0 mg KOH/g